Ballard X-Blade Adapter Kit 2-1/2″W X 15/16 Center Hole 3-PK (1 Mower) #XBE-1

Description
The X-Blade Dual Mulching Blade Adapter Kits were designed to turn your ordinary side discharge commercial mower into an extreme grass pulverizing machine. The X-Blade Dual Mulching Blade Adapter Kits come in 7 options to fit most dual blade commercial mowers.

The X-Blade Dual Mulching Blade Adapter holds your original blade and an additional mulching blade at a perfect 90 degree angle. Your original blade (lower) will give the clean height of cut and the mulching blade above, with multiple cutting edges, pulverizes the cut grass as it cycles through the deck chamber dramatically reducing grass clipping size.

With the use of the X-Blade Dual Mulching Blade Adapter Kit you can not only mulch but bag more efficiently as well. This kit allows you to bag the grass with more vacuum and grass packing than ever before, as well as side discharge with confidence.

Also, when using The X-Blade Dual Mulching Blade Adapter Kit, you are ensuring a perfect balance to the machines blade spindles, which will not allow blade slippage, which can cause a blade to over torque and become nearly impossible to remove. We do recommend lowering the RPM’s when you engage and disengage the PTO clutch.

​The X-Blade Dual Mulching Blade Adapters fit all standard commercial mower blades that are 2 1/2″ wide and have a 15/16″ center hole.

Mower blades used with the X-Blade Dual Blade Adapters must be FLAT, COMMERCIAL MOWER BLADES (Not for use on homeowner mowers/zero turns, blades longer than 21″ or stamped-non flat blades). Recommended for mower deck sizes 32”-61” with blades 2 ½” wide, 15/16” center hole & 3/16” thick.

Pro Tip: add longer bolts to get more threads; grade 8, 2 1/2” long, 1/2” fine thread, Found Here or at any hardware store.

PLEASE NOTE: The X-Blade Dual Mulching Blade Adapters fit all standard commercial mower blades that are 2 1/2″ wide and have a 15/16″ center hole allowing the “spline” to go through.

* Blades NOT included

*High Lift Blades NOT Recommended*

Please VERIFY your blade size and center hole size BEFORE ordering
>**No returns on used X-Blade Kits**>