Hay Equipment

Category
Brand
Price
$27.00 — $17527.00

Safford Equipment carries Bush Hog hay equipment built for how Wiregrass operations put up hay. Our disc mowers and tedders mount to the tractor’s 3-point hitch and run off the PTO; our V-rakes and wheel-driven rakes tow behind on their own wheels. Either way, the fit comes down to matching width and horsepower to the tractor you already have. Cattle operations feeding their own herd and full-time hay producers running acreage for sale both shop this lineup, and our team can help size the right equipment to your setup before you spend a dollar.

Hay Equipment Built for Your Tractor

Most of the calls we get about hay equipment start with the same question: Will this fit what I've already got? Our Bush Hog disc mowers run off a Category 2, 540 RPM PTO and need 40-56 minimum horsepower depending on width. Our tedders run off that same 540 RPM PTO at 15-22 minimum horsepower. V-rakes and wheel-driven rakes skip the PTO: they're ground-driven, towing behind the tractor on their own wheels. Wheel-driven rakes and our 8- and 10-wheel V-rakes need a minimum of 30 horsepower to pull; our largest V-rake, the 12-wheel model, steps up to 50 minimum horsepower. That spread covers a small-acreage operator on a compact tractor and a commercial producer on a full-size utility tractor, just at different working widths. Tractor pulling a red tedder across a green field, with power line pylons in the background.

Hay Equipment for Every Stage From Cutting to Windrowing

Putting up good hay is a sequence: cut it, dry it, gather it into a windrow the baler can handle. The equipment below covers the first three steps, and each type comes in more than one working width so you can match it to your tractor's horsepower and the acreage you're covering in a season.

Hay Mowers

A hay mower is the first cut, and Bush Hog's disc mowers handle it with a rotating cutterbar that shears standing hay cleanly instead of tearing it, which cuts down on regrowth damage and leaves a more even swath for tedding. Our lineup covers 6'7", 8', 9'3", and 10'6" working widths, needing 40-56 minimum horsepower depending on size, so a smaller property running one cutting a year and an operation cutting multiple fields on a schedule can both find a hay mower sized to the job and the tractor pulling it.

Hay Tedders

A hay tedder picks up the cut swath and spreads it back out so more of it is exposed to sun and airflow, which matters in Wiregrass summers where afternoon humidity can slow curing and put a cutting at risk of mold or heating in the bale. Our HT210 is a compact two-rotor unit built for 15 minimum horsepower tractors, and the four-rotor HT417 and HT417H step up to a 17-foot working width for tractors with 22 minimum horsepower. Running a tedder an hour or two after cutting, then again the next morning, is usually what separates a two-day curing window from a three- or four-day one.

Hay Rakes

Once hay is cured, a hay rake gathers it into a windrow sized for your baler. Our V-rakes (8, 10, or 12 finger wheels, depending on model) form a single, tighter windrow that suits round balers and higher-capacity operations, while our wheel-driven rakes (8 or 10 finger wheels) are ground-driven, running up to 14 mph behind the tractor, and are easier to match to smaller tractors and irregular fields. Both styles tow behind rather than run off the PTO. Wheel-driven rakes and our 8- and 10-wheel V-rakes need a minimum of 30 horsepower; the 12-wheel V-rake needs 50 minimum horsepower. Which one fits depends on your baler, your ground, and how many acres you're raking in a day.

Get Hay Equipment Matched to Your Tractor and Your Acreage

Bring your tractor's horsepower, your baler type, and your acreage to Safford Equipment, and we'll walk you through the Bush Hog hay equipment that matches your operation. You can apply for financing for Bush Hog equipment, and our parts department keeps you stocked once the equipment is in the field. Shop All Farm Equipment

Hay Equipment FAQs

What's the difference between a hay tedder and a hay rake?

A tedder spreads cut hay out to speed drying; a rake gathers already-cured hay into a windrow for baling. They do opposite jobs in the same process, and most operations running more than a few acres eventually need both.

How soon after cutting should I tedder or rake hay?

Tedding typically starts a few hours after cutting, once the top of the swath has wilted, and often gets repeated the next morning to keep drying even. Raking waits until the hay is fully cured and ready for the baler, usually one to three days after cutting, depending on humidity and sun.

What size hay rake or tedder do I need for my tracker?

Horsepower is the limiting factor, not working width. Our HT210 tedder needs a minimum of 15 horsepower, while the wider four-rotor HT417 and HT417H need 22. V-rakes and wheel-driven rakes are towed rather than PTO-driven: most need a minimum of 30 horsepower, though our largest V-rake, the 12-wheel model, needs 50.

Will Bush Hog hay equipment work with the tractor I already own?

In most cases, yes, though the drivetrain differs by equipment type. Our disc mowers mount to a Category 2, 3-point hitch and run off a 540 RPM PTO, needing 40-56 minimum horsepower depending on width. Our tedders use that same 540 RPM PTO at 15-22 minimum horsepower. V-rakes and wheel-driven rakes skip the PTO entirely: they're ground-driven and tow behind the tractor. Most need a minimum of 30 horsepower, though our largest V-rake, the 12-wheel model, needs 50.

What equipment do I need to put up my own hay?

At a minimum, you'll need a mower to cut it, a tedder to dry it, and a rake to windrow it before baling. Some smaller operations skip the tedder if fields are small and drying conditions are good, but in Alabama's humidity it's usually what keeps a cutting from getting rained on or heating in the bale.

Does Safford Equipment offer financing on hay equipment?

Yes. Bush Hog is one of the equipment categories listed on our financing application, alongside our mower and trailer lines.