Baumalight 3-PT Hitch Stump Grinder
Our price:
$2,999.00
The 1P24 PTO stump grinder is designed for small tractors equipped with hydrostatic drive and Category 1 3PH. This tractor mounted stump grinder model allows you to grind small and midsized stumps efficiently with a 24″ Rotor, carrying 34 replaceable carbide teeth and has a cutting depth of 10″ above ground and 6″ below ground with the cutting wheel speed of 540 RPM. The carbide tipped teeth is 3/4-inch-thick. The maximum cutting depth per pass is 5″ and maximum horizontal cut is 22″.With no hydraulics required this versatile PTO Stump Grinder is controlled with gravity feed which is ideal for tractors with no hydraulic remotes. In case if there is a sudden advance of the tractor while grinding, the hinge will automatically swing the grinding head out a bit, keeping even pressure on the stump. The stump grinder unit weight is 350 Lbs having a width and length of 48″. A stump of 30″ width and 12″ depth can be ground in 15 mins with a 40HP tractor, with 30HP it takes around 20 mins. ¾” thick steel rotor acts as a backbone for the stump blaster cutting system.
QUICK HITCH COMPATIBLE
The 1P24 Stump Grinder is CAT 1 Quick Hitch compatible, allowing you to easily connect to your compact tractor.
SLIP CLUTCH PTO SHAFT
The 1P24 Stump Grinder includes a slip clutch PTO shaft. In the event that the grinder hits a rock, the slip clutch is designed to slip so that the shaft is not damaged. (this started in mid 2020).
SELF-REGULATING FEED
For smoother operation, the 1P24 3-point hitch stump grinder features a self-regulating feed function that uses the weight of the grinder head. If you suddenly advance your tractor while grinding, a hinge will automatically swing the grinding head out a bit, keeping even pressure on the stump.
CARBIDE TIPPED
Like the finest saw blades, the cutting teeth on Stump Blasters are carbide tipped. This incredibly hard material ensures reliable cutting performance. When grinding stumps, buried hazards are inevitable; gravel, stones even metal posts are not uncommon to “find”. Our carbide teeth are designed to stand up to this abuse and keep on blasting stumps to dust
6 FREE TEETH
All 1P24 Stump Grinder comes with a free set of 6 replacement teeth. These replacement teeth are conveniently shipped in a robust enclosed compartment on top of the frame.
MORE TEETH
Many hands make light work, or in this case fine mulch faster and easier. The high number of teeth means that each tooth does less work. Each of the Stump Blasters teeth only need to make a small cut, because the work is shared by more of these rugged teeth, which last longer and typically only need 2 or 3 replaced at a time. The bolt-on designed teeth allow for straightforward replacement.
ROTOR
The massive ¾” thick steel rotor provides the back bone for the Stump Blaster cutting system. It’s the anchor for the carbide tipped teeth. For smooth operation it’s important that the rotor remains solid, with no flexing. The rugged rotor also provides the Stump Blaster with the extra momentum needed when the grinding is tough, making sure the Stump Blaster can power through the hardest stumps.
MORE CLEARANCE
The Stump Blaster’s carbide teeth extend a full 1-¼ inches from the rotor. This prevents chips and mulch from getting plugged. More chip clearing produces smoother operation and reduces heat build-up that can damage the rotor and cause premature tooth failure.
GREASEABLE PINS
The grease pins are zinc plated to prevent corrosion which will allow for smoother operation of the units joints over their lifetime.
| Weight | 450 lbs |
|---|---|
| Dimensions | 48 × 48 × 36 in |
| MPN |