Amco Outer Cone OEM #10295

Restore factory-correct bearing geometry, load distribution, and hub integrity to your Amco tillage equipment with this Genuine OEM Outer Cone (Part #10295). AMCO Manufacturing has been building agricultural implements since 1947 and pioneered agricultural anti-friction bearings — including the triple lip sealed and regreasable bearings used across their disc harrows, ditchers, levee plows, and wheel offset harrows. This authentic outer cone is precision-manufactured to exact Amco specifications — delivering the correct taper geometry, roller contact angle, and dimensional tolerances required for proper bearing preload, smooth hub rotation, and reliable long-term performance in demanding field and transport conditions.

What the Outer Cone Does:
In tapered roller bearing assemblies used across Amco tillage equipment, the outer cone is the inner race assembly consisting of the cone (inner ring), tapered rollers, and retaining cage. It works in direct tandem with the outer bearing cup (outer race) seated in the hub housing. Together, the cone and cup establish the correct internal bearing geometry that allows the assembly to carry both the radial loads of equipment weight and the axial thrust loads generated during tillage — loads that would quickly destroy a less capable bearing design. Correct cone selection and installation preload are critical: too little preload causes bearing play and accelerated wear; too much preload causes overheating and premature failure. Always set preload to Amco’s factory-specified torque value after installation.

Signs Your Outer Cone Needs Replacement:

• Visible pitting, spalling, scoring, or heat discoloration on the cone rollers or raceway surface
• Rough, notchy, or grinding rotation when the hub is spun by hand
• Excessive hub play that cannot be corrected by preload adjustment alone
• Abnormal heat buildup at the wheel hub during transport or field operation
• Bearing contamination from water, soil, or failed seal requiring full hub rebuild
• Routine bearing service interval — always replace cones and cups as a matched set
• Cone damaged from impact, over-tightening, or improper installation

Critical Service Reminder:
Tapered roller bearing cones and cups are precision-matched components. When replacing the outer cone, always replace the corresponding outer cup at the same time — installing a new cone against a worn cup (or vice versa) dramatically shortens the service life of the new component and wastes the cost of the replacement. After installation, set bearing preload per Amco’s factory specification, verify smooth hub rotation, and check running temperature after initial field use.

Key Features:

• Genuine Amco OEM part — not aftermarket or generic
• Factory-correct taper angle and roller geometry for proper load distribution across the full contact length
• Supports both radial equipment weight loads and axial thrust loads generated during tillage operations
• Precision-manufactured to exact Amco dimensional tolerances for correct hub fit and preload adjustment
• Hardened steel construction for long service life under heavy agricultural field and transport demands
• Direct OEM replacement — installs to Amco factory hub specification

Compatibility:
This outer cone fits select Amco disc harrow, levee plow, ditcher, wheel offset harrow, bedding hipper, and other Amco tillage equipment models. Amco’s equipment line includes the F15 and F17 folding and tandem disc harrows, F41/J41/F42/J42/J43/J44 wheel offset harrows, G2 wheel offset harrow, LTF and LOF lift harrows, ditchers, levee plows, terracing plows, bedding hippers, border plows, and water furrow plows. Always confirm the correct part number using your Amco model and serial number — found on the equipment identification plate on the frame — and cross-reference against your unit’s parts manual before ordering.

Part Details:

• Part Number: 10295
• OEM Brand: Amco Manufacturing
• Part Type: Outer Cone (Tapered Roller Bearing Inner Race Assembly)
• Material: Hardened Steel
• Application: Select Amco Tillage Equipment Bearing Hub Assemblies
• Condition: New / Genuine OEM