Always keep a razor-sharp Chipper Knife Kit on hand, as your chipping knife will dull over time. With a replacement knife nearby you can install the new, sharp knife and continue working.
Because our knives are made of high-carbon/high-chromium forged alloy tool steel, they can go significantly longer than the knives on most “bargain” chippers without sharpening. Still, as with any cutting tool, keeping a sharp edge is important for maintaining peak performance. When the chipper starts to “bog” down, and/or vibrates and requires that you regularly force the material downward into the chipper chute, it’s usually a sign that the knife is dulling. Many customers choose to get an extra knife to have on hand. That way, you can keep working with a minimum of downtime.
Knife Kit #16762 is for the Road Towable Top Discharge Chipper Shredder manufactured in 2019 or after.
The replacement DR Rapid-Feed Chipper Knife Kit comes with all the necessary hardware.
Hardened steel knife
Please Note:Proper knife to wear plate gap is important; it should be 1/16″. Please refer to your owner’s manual for sharpening and installation instructions. Please call us toll-free 1-800-687-6575 if you have questions about your DR.
TIP: If chipping a lot of soft wood (pine, spruce etc.), and pitch build up is observed on the knife, it is recommended to occasionally chip some hard wood to clean the pitch off the knife.
12HP Chipper Model# C12-C122-C122E-C123E-CHP (See Notes for Serial #’s)
13HP Chipper Model# C13-C13E-CHP (See Notes for Serial #’s)
16HP Chipper Model# C163-CHP ( Ser# 15660O To 18328O)
18HP Bottom Discharge Road Towable Model# C184-CHP (Ser# 01000H To 03039H)
18HP Top Discharge Model# C18TLC (Ser# 01000L To 05086TL)
19HP Chipper Model# TLC19 CHP SER# 04650TL, 04651TL, 04909TL 06011TL – 07723TL
TPH Bottom Discharge TPH-CHP (Ser# 01002TP – 05649TP)
TPH Top Discharge TPHTD-CHP (Ser# 01002TD – 04717TD)
Length: 4 inches
Width: 1.5 inches