Bush Hog 5V x 710 Drive Belt For 5-Foot Frame Genuine OEM #BH000-6693

Keep your Bush Hog rotary cutter running at full cutting performance with this Genuine OEM 5V x 710 Drive Belt (Part #BH000-6693). Confirmed as the Belt 5V x 710 for the 5-Foot Frame, this factory-authorized OEM belt is precision-manufactured to exact Bush Hog specifications — delivering the correct cross-section geometry, outside circumference, and tensile cord construction required for reliable, high-efficiency power transfer between the gearbox and blade spindle on compatible 5-foot Bush Hog rotary cutter models.

Belt Specifications:

• Belt Type: 5V (Heavy-Duty V-Belt)
• Outside Circumference: 710 (71.0 inches)
• Cross-Section: 5/8″ top width, heavy-duty 5V profile
• Application: 5-Foot Frame Bush Hog Rotary Cutter Drive System

Why the 5V Belt Profile Matters:
The 5V belt designation identifies this as a heavy-duty, narrow-profile V-belt designed for high-power, high-speed agricultural drive applications. Compared to standard B-section belts, the 5V profile features a deeper, more rigid cross-section that wedges more aggressively into the sheave groove — delivering greater power transmission efficiency, reduced slippage under load, and improved heat dissipation during extended cutting sessions. In a Bush Hog 5-foot rotary cutter’s drive system, where the belt must transmit full PTO power directly to the blade spindle through a single sheave drive, the 5V cross-section is the engineered choice for reliable, long-service operation. Using a standard V-belt or an incorrect cross-section results in premature belt wear, slippage under load, and reduced cutting performance.

Why Genuine OEM Belts Matter:
Drive belt length and cross-section are precision specifications. An aftermarket belt that is even slightly off in outside circumference will run at incorrect tension — too tight and it overloads bearings; too loose and it slips, squeals, and wears rapidly. Bush Hog’s OEM belt is manufactured to the exact 710 outside circumference and 5V cross-section that the rotary cutter’s sheave geometry was designed for, ensuring correct operating tension, sheave wrap angle, and power transfer efficiency right out of the box.

Signs Your Drive Belt Needs Replacement:

• Blade spindle slowing or stopping under cutting load — belt slipping
• Squealing or squeaking noise during operation, especially under load
• Visible cracking, glazing, fraying, or chunks missing from the belt surface
• Belt tension cannot be maintained — stretched beyond adjustment range
• Belt has jumped off the sheave — possible sign of worn sheave grooves or incorrect belt
• Routine seasonal maintenance — inspect belt at start of each cutting season

Key Features:

• Genuine Bush Hog OEM part — not aftermarket or generic
• 5V x 710 — factory-correct cross-section and outside circumference for 5-foot frame Bush Hog rotary cutters
• Heavy-duty 5V profile engineered for high-power agricultural rotary cutter drive applications
• Factory-correct tensile cord construction for correct operating tension and long service life
• Precision outside circumference ensures correct sheave wrap angle and power transfer efficiency
• Direct OEM replacement — installs to factory sheave specification without adjustment modification

Compatibility:
This drive belt fits Bush Hog rotary cutter models with 5-foot cutting frames that specify the 5V x 710 belt in their drive system. Always confirm fitment using your Bush Hog model and serial number — found on the equipment identification plate on the frame — and cross-reference against your unit’s parts manual to verify this is the correct belt for your specific gearbox and spindle sheave configuration. Not all 5-foot models use the same belt — confirm by part number before ordering.

Part Details:

• Part Number: BH000-6693
• OEM Brand: Bush Hog
• Part Description: Belt 5V x 710 — 5-Foot Frame
• Belt Type: 5V Heavy-Duty V-Belt
• Outside Circumference: 710 (71.0 inches)
• Application: 5-Foot Frame Bush Hog Rotary Cutter
• Condition: New / Genuine OEM